Silicone Sealant for Construction
Characteristics
-
One part, room temperature cure, easy to use, fast cure rate.
- Excellent weatherability and resistance against ultraviolet rays, ozone, rain, ice ect.
-
High elasticity, strong extension and recovery capability, cured sealant remains good elasticity over the temperature range from 50 to 200.
- Specially designed for transparent or semi-transparent materials with high thermal expansion factor such as monitor roofs to ensure that only low tensile and compressive stress will generate when monitor roofs extend or contract, and the sealant will not break but retain ever-lasting seal and water-proof performance.
- Excellent unprimed adhesion to common materials for monitor roofs .
-
Good transparency, able to be as permeable to light as monitor roofs.
-
It will emit slight amount of low-molecule substance, but this will not erode or stain monitor roofs and affect its appearance.
-
The application of the sealant can be carried out over temperature range form 4 to 40 .
Basic Uses
-
Structural , water-proof and joint seal in monitor roof engineering.
-
Glazing and water-proof seal in the assembling of roofs over waiting halls at railway stations, or coach stations and airports.
-
Glazing and water-proof seal of light-collecting facilities of gymnasium or entertainment facilities
-
Bonding and water-proof seal of advertisement decorations, signboards, electrically illuminated sign cases and so on.
Applicable Standards
Guibao993 meets or even exceeds following standards:
Enterprise standard Q/71304249-7.003.2005
Packaging
Guibao 993 is supplied in 350ml plastic cartridges (net 300ml).
Curing Time
As exposed to air, Guibao 993 will immediately react to moisture in the air and begin to cure in a surface- to-interior sequence. Its tack free time is about 30 minutes, and the final cure and optimum adhesion occurs after about 21 days.
Typical Technical Properties
| S/N
|
Testing Item
|
Index
|
Testing Method
|
|
LM
|
HM
|
|
1
|
Stoop Degree (mm)
|
≤3
|
GB/T 13477
|
|
2
|
Extrudability (ml/m)
|
≥80
|
|
3
|
Tack-free Time (h)
|
≤3
|
|
4
|
Tensile
Strength
MPa
|
Standard
|
≤0.40
|
0.4 or
0.6
|
GB/T 13477 |
|
-200C
|
≤0.60
|
|
5
|
Extension Rate at Break
|
≥300
|
GB/T 13477
|
Application Limitations
Guibao 993 should not be applied
Safe Handling Information
Fully cured Guibao 993 is not toxic, but avoid contacting with eyes. If that happens, rinse with a lot of water and seek medical treatment. Uncured Guibao 993 should be kept away from kids. It will give off low molecule substance while curing, so do keep construction and cure areas well-ventilated to avoid unfavorable effect on human health caused by the over-concentration of low-molecule substance.
Maintenance
Usually there is no requirement of maintenance. If sealants are damaged, remove the dust on the sealant using solvents and then fill the damaged sealant with fresh ones. Guibao sealants feature good adhesion to cured silicone sealants.
Technical Services
Complete technical information and literature, adhesion testing, compatibility testing and stain testing are available from Guibao.
Disclaimer
Guibao believes that the information is an accurate description of the typical characteristics and/or uses of the product or products. It is customers responsibility to thoroughly study and test the product in the specific application to determine its performance, efficacy and safety. |